3D Dragonfly Nail: AcryGel Sculpted Nail Art Tutorial with Meg

Ready to go big with your nail art? In this imaginative tutorial, Meg creates a stunning 3D dragonfly nail. The wings and body are sculpted separately from AcryGel in Tempting Fate, detailed with glitter, gold chrome and gems, then fixed onto a soft Petal Perfect base.

Building the pieces off the nail gives you far more control than sculpting directly on it. You can perfect each wing, clean up the edges and add every detail before attaching the finished dragonfly, which results in a crisp, polished piece of 3D art.

Why You'll Love This 3D Dragonfly Nail

This 3D dragonfly nail is a real showstopper. The wings shimmer with chunky 24 Karat gold glitter and delicate gold chrome veins, while the body sparkles with Athena and a row of multicoloured gems. Set against the clean, light Petal Perfect base, every detail stands out beautifully.

It's also a great introduction to sculpting with AcryGel. Because the pieces are made on a plastic surface and popped off once cured, you can practise and retry as many times as you need without touching the nail. Once you've mastered the technique, you can use it to make all kinds of 3D charms.

Products Used in This Video

How to Create a 3D Dragonfly Nail

1. Sculpt the wings

On a clean plastic surface, so the product won't stick and pops off easily, place two lines of Tempting Fate AcryGel of about the same amount side by side. Using slip solution and an AcryGel brush, freestyle the wing shapes, keeping them level and the same thickness. Add more product to sculpt the bottom wings too.

2. Add glitter and top coat

Blend 24 Karat, a chunky gold glitter, through the outer edges of the wings and cure. Top coat every part of the AcryGel and cure again.

3. Buff and dust

Give the wings a light buff to make sure there are no tacky or sticky layers, then dust away the debris.

4. Paint the wing outlines and veins

With Serious Black and a fine liner brush, outline the outer edges of the wings, then paint the veins inside them using a reference photo. Keep the lines thin, but slightly thicker in places so the chrome shows up.

5. Apply gold chrome

Apply the gold chrome pen and use a sponge to work it into the little details. Dust off, then top coat over the wings.

6. Pop off and clean up the wings

Pop the wings off the plastic – they should be solid. Clean up any excess gel and spiky bits around the edges with a small tool or e-file so the lines are smooth and crisp.

7. Sculpt the body

Squeeze out enough AcryGel for the length of the body, then shape it with slip solution and the AcryGel brush, adding small indents along it. Cure, then apply one layer of Athena over the top for shimmer and cure again.

8. Add the gems

Check where the wings will sit, then stick different-sized gems into the small indents on the body with glue.

9. Prepare the base nail

Apply two coats of Petal Perfect for a clean, light base that complements the other shades, then top coat.

10. Attach the dragonfly

Use Tip Adhesive Gel to place the body on the nail, just off centre, and cure. Attach the wings with a little glue underneath and Tip Adhesive Gel, placing the bottom wings underneath the top wings for the most natural look, and cure.

Pro Tips

  • Choose the right 3D product. Meg suggests Tip Adhesive Sculpting Gel for some 3D work, and AcryGel for flatter pieces where you want a hard finish.
  • Want a curve? Sculpt on a curved surface instead of a flat one to build a bend into your 3D piece.
  • Scale it for clients. The wings can be as big or small as you like – make them smaller if they're going on a client.
  • Sponge your chrome. Even with a chrome pen, a sponge helps you get into the fine details.
  • Check placement before gems. Work out where the wings will sit before sticking the gems onto the body.

Who Is This Design For?

This 3D dragonfly nail is ideal for nail artists who want to push their creativity and try sculpting with AcryGel. The process is broken into manageable stages, and because the wings and body are made off the nail, it's a forgiving way to learn. Some experience with liner work will help when painting the veins.

For nail techs, the dragonfly makes a beautiful statement accent nail, especially for spring and summer. As Meg points out, you can scale the wings down for clients so the design is more wearable day to day.

Ways to Make It Your Own

Using the same techniques, you could:

  • Make the wings smaller for a more subtle, wearable accent nail.
  • Sculpt the wings on a curved surface to give them a natural bend.
  • Vary the size and placement of the gems along the body.
  • Pair the 3D dragonfly nail with plain Petal Perfect nails for a balanced set.

Aftercare: Protecting Your 3D Dragonfly Nail

3D nail art needs a little extra care. Apply cuticle oil regularly to keep the skin around your nails hydrated, and wear gloves when cleaning or washing up. Be careful around the raised wings and gems, particularly when reaching into bags or pockets, and avoid using your nails as tools.

Don't pick or peel at the gel or the 3D elements, as this can damage the natural nail underneath. When you're ready for a change, have the design removed properly.

Frequently Asked Questions

Why sculpt the wings on plastic?

A clean plastic surface means the AcryGel won't stick, so the cured wings pop off easily and should be solid.

Should I use AcryGel or sculpting gel for 3D work?

Meg suggests Tip Adhesive Sculpting Gel for some 3D work, and AcryGel for flatter pieces where you want a hard finish.

How do you attach the dragonfly to the nail?

The body is placed just off centre with Tip Adhesive Gel and cured. The wings are attached with a little glue underneath and Tip Adhesive Gel, with the bottom wings placed underneath the top wings.

Can I make the wings curved?

Yes. Sculpt them on a curved surface instead of a flat one to build a bend into the piece.

Create Your Own 3D Dragonfly Nail

With glittering gold-chrome wings, a shimmering jewelled body and a soft Petal Perfect base, this 3D dragonfly nail is a true piece of wearable art. Watch Meg's full video tutorial above, gather the products listed, and sculpt your own 3D dragonfly nail.

Verwandt Artikelen